Sign Up!
Login
Welcome to Motorcycle Thailand
Thursday, August 21 2014 @ 04:36 AM ICT
 Forum Index >  Motorcycle Riding >  Learning to Ride Motorcycle New Topic Post Reply
 Problems Cornering
   |  Printable Version
By: Anonymous: Martin ()  Monday, February 11 2008 @ 11:35 PM ICT (Read 2532 times)  
Anonymous: Martin

I bought a Suzuki GSX R1400, and I already looked at the article about the GSX-R1400. But I still have a question...

Tight corners, especially 90 degree turns, blow my mind. I always end up rolling off far more than necessary. What can I do?



       
  Quote
By: Anonymous: Will ()  Thursday, February 14 2008 @ 08:08 AM ICT  
Anonymous: Will

You can't force confidence, and worrying about your speed won't make you more confident, it will put you more on edge. Worse, chasing speed could lead to going far too fast into a tight corner in a attempt to make it out the other side.

So rather than worrying about how fast you're going, concentrate on how you're sitting on the bike and where you're looking. You want to stay relaxed, with you're inside shoulder dropped and your head turned into the corner while you really focus on where the corner's going. As you become more comfortable and confident, getting better at matching your speed to these tight turns, you'll gradually get faster. Just don't rush it.


       
  Quote
By: Anonymous: Vrilot ()  Monday, February 18 2008 @ 08:30 AM ICT  
Anonymous: Vrilot

This problem is quite common. In fact, two of the riders I trained this week asked for help on this very subject. In my experience, riders tend to have more hairy moments in tight corners than they do in fast ones.

The tighter the bend the more precise your speed needs to be on the way in, being 10 km/h out for a 40 km/h bend doesn't sound like a lot, but the line you have to take through the corner is enormous. The governing factor here is simply physics.

Double the velocity (speed) of a mass (bike and rider) and you quadruple its kinetic energy. So double the speed and quadruple the radius on which you have to turn.

Another problem we have is that tight corners are always difficult to asses, the point at which we can accurately asses the corner may well not be until we're right on top it or even, sometimes, turning into it. Corners of any description rarely have a constant radius and tighter bends are more likely to have a varying radius, rarely with the tight part of the corner at the start.

Corners that cannot be accurately assessed before the entry point require us to have the techniques to change speed in the corner. Learning how to trail throttle and to trail brake into corners can make a significant difference to your confidence as it gives you the tools to be able to cope with these situations.

In the meantime, it is much better to roll off more than is necessary and not worry about it. At least you're safe, and in any case, if you are slightly slower into the corner, you'll be able to take a much better exit line and get on the acceleration earlier.


       
  Quote
New Topic Post Reply


 All times are ICT. The time is now 04:36 am.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic w/ New Post Sticky Topic w/ New Post
Locked Topic w/ New Post Locked Topic w/ New Post
View Anonymous Posts 
Able to Post 
HTML Allowed 
Censored Content 

Advertising


Poll

How many times have you crashed your motorcycle in the last three years?

  •  Never
  •  Once
  •  Twice
  •  Three times
  •  Four times
  •  Five times
  •  More than 6 times
  •  More than 10 times
This poll has 0 more questions.
Results
Other polls | 3,423 votes | 13 comments

TMEA MEMBER

Thai Motorcycle Enterprise Association

Events

There are no upcoming events

Motorcycle Thailand on Facebook

Motorcycle Thailand on Facebook

My Account





Sign up as a New User
Lost your password?