Hi everyone. Im from Spain and Im having problems installing new 56mm Daytona piston and cylinder.
Anyone knows the correct torque for the 4 main nuts that fit the cylinder head/cylinder to the crankcase?.
Ty in advance for your help.

Quote by: kanina

Hi everyone. Im from Spain and Im having problems installing new 56mm Daytona piston and cylinder.
Anyone knows the correct torque for the 4 main nuts that fit the cylinder head/cylinder to the crankcase?.
Ty in advance for your help.

Hereby the torque values for your Honda engine

Thank you Thaidesing. But are you sure that table is for Honda Wave/ANF 125?. I see there is a torque set for water pump impeller, but my engine is air-cooled. Also I see a torque for 8? camshaft holder bolts; my engine doesn´t have 8 bolts; the camshaft have only to be slided into the bearings holes and stopped with a plate.
Here is a link with graphics:
http://www.oemmotorparts.com/oem4.asp?M ... HO-ANF1253

The information is from a standard Honda motorcycle service manual, Honda uses for all its motorcycles the same torque for fasteners.

OK, I understand now. Thank you for your fast help.