Torque of wave 125 main cylinder nuts

New Topic Post Reply

5 posts :: Page 1 of 1

Re: Torque of wave 125 main cylinder nuts

By: Anonymous: kanina () Sunday, 25 March 2012 @ 02:39 AM ICT (Read 6103 times)

Hi everyone. Im from Spain and Im having problems installing new 56mm Daytona piston and cylinder.
Anyone knows the correct torque for the 4 main nuts that fit the cylinder head/cylinder to the crankcase?.
Ty in advance for your help.

Anonymous

Quote

Re: Re: Torque of wave 125 main cylinder nuts

By: ThaiDesign (offline) Sunday, 25 March 2012 @ 08:34 AM ICT

Quote by: kanina
Hi everyone. Im from Spain and Im having problems installing new 56mm Daytona piston and cylinder.
Anyone knows the correct torque for the 4 main nuts that fit the cylinder head/cylinder to the crankcase?.
Ty in advance for your help.

Hereby the torque values for your Honda engine

ThaiDesign

Group Comfort
Level:: +30
Registered:: 21/09/07

Posts: 353

Quote

Re: Re: Torque of wave 125 main cylinder nuts

By: Anonymous: kanina () Monday, 26 March 2012 @ 07:01 AM ICT

Thank you Thaidesing. But are you sure that table is for Honda Wave/ANF 125?. I see there is a torque set for water pump impeller, but my engine is air-cooled. Also I see a torque for 8? camshaft holder bolts; my engine doesn´t have 8 bolts; the camshaft have only to be slided into the bearings holes and stopped with a plate.
Here is a link with graphics:
http://www.oemmotorparts.com/oem4.asp?M=Honda&T=ANF125&Y=2003&L=HO-ANF1253